d22f196b

2.2.11. Removal and installation of the operating oil valve (OCV) (L3)

Disconnect a negative wire of the rechargeable battery.
Remove an opening plate under a stopper.
Remove a high-voltage wire.
Disconnect the socket of the operating oil valve (OCV).
Measure resistance between conclusions of A and B ohmmeter.
Remove a ventilation hose.
Uncover a head of the block of cylinders.

Fig. 2.102. Komponeta of the power unit, the gas distribution mechanism drive chains dismantled at removal: 1 – cover of a head of the block of cylinders; 2 – fixing bolt of a pulley of a bent shaft; 3 – pulley of a bent shaft; 4 – pulley of the pump of cooling liquid; 5 – tension pulley of a belt of the drive; 6 – rubber support of the engine No. 3 and arm of fastening of the engine No. 3; 7 – forward cover of the engine; 8 – forward epiploon; 9 – natyazhitel of a chain; 10 – lever of a natyazhitel; 11 – sending to a chain; 12 – gas distribution mechanism drive chain; 13 – consolidation; 14 – natyazhitel of a chain of the oil pump; 15 – sending to a chain of the oil pump; 16 – asterisk of the oil pump; 17 – chain of the oil pump; 18 – camshaft asterisk


Remove the operating oil valve (OCV) (fig. 2.102).

Fig. 2.116. Removal of the operating oil valve (OCV): 1 – the operating oil valve (OCV)


Establish as it should be, the return to removal.