Disconnect a negative wire of the rechargeable battery.

Merge cooling liquid of the engine.

Weaken a bolt of a pulley of the pump of cooling liquid to take off a driving belt.

Remove a pulley of the pump of cooling liquid.

Remove the pump of cooling liquid.

Carry out a visual inspection and be convinced that on the case and blades of the water pump there is no considerable pollution or a rust.

Make sure that on bladed the shaft does not have a side play and that it rotates freely by hand.

You make installation as it should be, the return to removal.

Again fill in cooling liquid in the engine.

Fig. 2.217. Removal of the pump of cooling liquid: 1 – pulley of the pump of cooling liquid; 2 – pump of cooling liquid; 3 – sealing ring; 4 bolts of fastening of the pump

Be convinced of lack of leak of cooling liquid.