d22f196b

4.2.2.1. Removal

Turn off a bolt of fastening of the sensor of speed of a wheel.
Turn off a bolt of fastening of an arm of a brake hose.
Turn off a nut of fastening of a rack of the stabilizer and a bolt of fastening of the lower part of the shock-absorber.
Remove a dynamic damper.
Turn off a bolt of fastening of a fork of the shock-absorber.
Weaken, but do not turn off finally three nuts of fastening of the top cover of a rack of the shock-absorber.
Remove the shock-absorber assembled and fix it at the special stand.
Close a spring fabric and install special devices.

Fig. 4.12. Removal of a nut of fastening of a rod of the shock-absorber


Squeeze a spring by means of adaptation and turn off a nut of fastening of a rod of the shock-absorber (fig. 4.12).