2.6.4.2. Removal of a natyazhitel of a chain
Drown a connecting plate of a natyazhitel of a chain through a technological opening on the left side, using the thin screw-driver with flat shliyets (the precision screw-driver).
Fig. 2.256. Connecting plate of a natyazhitel of a chain
|
Slowly take away a plunger back in the direction shown in the figure 2.256, at the same time the connecting plate has to remain drowned.
Release a connecting plate at the pressed plunger.
Weaken pressure upon a plunger a little and move a plunger back and forth on 2–3 mm.
Fig. 2.257. Fixing of a connecting plate and plunger of a natyazhitel of a chain
|
Insert a thick wire or a paper clip about 1 thick. 5 mm in openings of a connecting plate and the case of a natyazhitel (openings have to be combined) for fixing of a connecting plate and a plunger (fig. 2.257).