d22f196b

2.6.5.1. Removal

Remove a gas distribution mechanism drive chain.
Remove the pipeline and an arm of the valve of recirculation of the fulfilled gases
Remove the forward sensor of concentration of oxygen with heating
Remove a rope of an accelerator and an arm
Remove a hose of supply of fuel and a plait of wires of a fuel nozzle
Remove an air hose, a throttle branch pipe and an inlet collector
Disconnect the following elements:
– the socket of the back sensor of concentration of oxygen with heating;
– main muffler.
Remove three-component catalytic converter.
Remove the top hose of a radiator.
Remove a heater radiator hose.

Fig. 2.271. Order of weakening of bolts of fastening of a cover of the bearing of a cam-shaft


Weaken bolts of fastening of a cover of the bearing of a cam-shaft in 2–3 passes in the order shown in the drawing (fig. 2.271).
Uncover cam-shaft bearings.

Fig. 2.272. Order of weakening of bolts of fastening of a head of the block of cylinders


Weaken bolts of fastening of a head of the block of cylinders in 2–3 passes in the order shown in the figure 2.272 and remove them.