2.6.8.3. Removal of support of the engine No. 3 and No. 4
|
Fig. 2.283. Fixing of the engine on a motor jack
|
Fix the engine and the transmission in the block with the main transfer, using a motor jack and the extra (fig. 2.283).
- 1. Operation and maintenance of the car
- 2. Engine
- 2.1. General description of new engines of the L8, LF and L3 models
- 2.2. Mechanical part of engines
- 2.3. Appendix 1
- 2.4. Appendix 2
- 2.5. Appendix 3
- 2.6. The Z6 engine – a mechanical part
- 2.6.1. Check of a belt of the drive of auxiliary units
- 2.6.2. Check of thermal gaps in the mechanism of the drive of valves
- 2.6.3. Check of a compression
- 2.6.4. Removal and installation of a chain of the drive of the mechanism of gas distribution
- 2.6.5. Replacement of laying of the block of cylinders
- 2.6.6. Replacement of a forward epiploon of a bent shaft
- 2.6.7. Replacement of a back epiploon of a bent shaft
- 2.6.8. Removal and installation of the engine
- 2.6.8.1. Removal
- 2.6.8.2. Removal of the socket of the main block of safety locks
- 2.6.8.3. Removal of support of the engine No. 3 and No. 4
- 2.6.8.4. Removal of a support of the engine and No. 4
- 2.6.8.5. Installation of a support of the engine and No. 4
- 2.6.8.6. Installation of a support of the engine No. 3
- 2.7. Lubrication system
- 2.8. Cooling system
- 2.9. System of an admission
- 2.10. Fuel system
- 2.11. System of production of the fulfilled gases and system of decrease in toxicity
- 2.12. System of ignition
- 2.13. Control system
- 2.14. Tables
- 3. Transmission
- 4. Running gear
- 5. Steering mechanism
- 6. Brake system
- 7. Onboard electric equipment
- 8. Body
