Fig. 2.114. Places of putting sealant

Apply kremniyevoorganichesky sealant on the interfaced surfaces of the block of cylinders in the places shown by shooters (fig. 2.114).

Diameter of a point of drawing – 4,0–6,0 mm.

Establish a cover of a head of the block of cylinders with new laying.

Fig. 2.115. Order of tightening of bolts of fastening of a cover of a head of the block of cylinders

Tighten fastening bolts in the order specified in the figure 2.115, the moment of an inhaling of 8-11,5 N · m.